Uno Vita red light therapy shade hat supports hair growth and brain health with red and near-infrared light

Uno Vita red light therapy shade hat: Innovative therapy for hair growth and brain health

The Uno Vita Red Light Therapy Shade Hat is designed to promote hair growth, counteract hair loss and improve brain health through advanced red light therapy and transcranial photobiomodulation (tPBM). This innovative device uses a combination of red and near-infrared light to provide a range of health benefits.

The sun hat promotes a healthy scalp, pain relief and cognitive support.

Hair growth and hair loss

Red light therapy has been shown to be an effective treatment for hair loss and to stimulate hair growth. Light in the spectrum 660 nm to 850 nm penetrates deep into the scalp and hair follicles, promoting cell activity and stimulating the production of ATP (adenosine triphosphate), which is essential for cell growth and repair. This results in:

• Stimulation of hair growth: Red light activates the hair follicles, which can lead to thicker and stronger hair growth.

• Reduction of hair loss: By improving the health of the hair follicles, red light therapy can help reduce the rate of hair loss.

• Improved scalp health: Red light therapy can increase blood circulation in the scalp, which nourishes the hair follicles and promotes a healthy scalp.

Headache and pain relief

Red light therapy can be effective in reducing pain and relieving headaches. The red light penetrates the tissue and reduces inflammation, while increasing blood flow and oxygen supply to the area, which can help to:

• Pain relief: Reduces pain caused by migraines and tension headaches.

• Reduced inflammation: Helps reduce inflammation in the tissue, which can relieve pain and discomfort.

Transcranial photobiomodulation (tPBM)

Transcranial photobiomodulation is a treatment that uses near-infrared light to stimulate brain activity. This light penetrates deep into the brain tissue and can improve cognitive function and brain health. The benefits include:

• Improved cognitive function: tPBM can improve memory, attention and overall cognitive performance.

• Neuroprotection: Helps protect brain cells from damage and can promote repair and regeneration of neurons.

• Stress reduction: Reduces symptoms of stress, anxiety and depression by balancing neurotransmitter activity in the brain.

General health benefits

• Increased energy level: By stimulating the production of ATP in the cells, red light therapy can increase energy levels and reduce fatigue.

• Improved sleep quality: Regular use of red light therapy can contribute to better sleep quality by regulating melatonin production.

• Strengthened immune system: Red light therapy can strengthen the immune system by improving cell function and increasing the production of immune cells.

How does it work?

When red and near-infrared light is delivered within the optimal wavelengths and energy levels, it protects the body's cells from damage from nitric oxide, which can otherwise stop the cell's production of ATP when you are stressed or ill. Red light photons allow your cells to continue to utilize oxygen efficiently by minimizing the absorption of nitric oxide. Only red light therapy can reach all the way into your cell's mitochondria to stimulate healing and regeneration, helping to improve your appearance, performance and overall well-being.

How to use Uno Vita's red light therapy shade hat

1. Connect to power: Connect the sun hat to an outlet or a portable power bank (not included) with a USB cable. Two buttons will light up. Then press the power button to turn on the device. It always starts at the lowest brightness (50%).

2. Distance and location: For best results, place your head directly in contact with the sun hat. This stimulates hair growth, counteracts headaches and improves memory and general brain health.

3. Select options:

   • Quickly press the power button once so that the power button lights up green: a. Press once to turn on all LEDs (660 nm and 850 nm). b. Press again to activate only the red LEDs (660 nm). c. Press again to activate only the near-infrared LEDs (850 nm). Note that infrared light is invisible to the human eye. d. Press again to turn off all LEDs.

   • If you press the power button for more than 3 seconds, the power button will illuminate blue and: a. Press once to start pulsing all LEDs (660 nm and 850 nm). b. Press again to pulse only the red LEDs (660 nm). c. Press again to pulse only the near-infrared LEDs (850 nm). d. Press again to turn off all LEDs.

4. Brightness adjustment: Use the second button to adjust the brightness:

   • Model 1: Low level (50%)

   • Model 2: Intermediate (75%)

   • Model 3: High Level (100%)

5. Frequency of use: Use the device 1-2 times per day for at least 4 weeks. The device automatically switches off after every 15 minute session. Allow the device to cool for a few minutes before the next treatment.

6. Storage: Pull the plug out of the socket and store in a cool, dry place.

7. Maintenance: For cleaning, use a damp towel or cotton cloth. Make sure the unit is unplugged before cleaning. Do not submerge the equipment in water. Allow the sun hat to air dry without direct sunlight.

Technical specifications

• Model: TLH150

• Wavelengths: 660 nm and 850 nm

• Brightness levels: Low (50%), Medium (75%), High (100%)

• Pulse frequency: 0-1000 Hz

• Frequency of use: 1-2 times a day, automatic switch-off after 15 minutes

• Power supply: USB cable, power bank (not included)

• Material: Water resistant, but not waterproof

• Maintenance: Clean with a damp cloth, avoid direct contact with water

• Safety: Not approved for use by children and pregnant women, avoid direct light in the eyes

What is included?

• 1 red light therapy shade hat

• 1 pc power cable

• 1 user manual

• 1 controller

• 1 pc 5V to 12V USB adapter cable

User guide

1. Connect:

   • Connect the remote control cable to the DC power port on the sunshade.

   • Connect the power adapter to the female DC input on the end of the remote control cable.

   • Plug the power adapter into a wall socket or connect to a power bank (5V external battery) via the USB power adapter cable.

2. Remote control operating instructions:

   • Screen: Shows all the functions of the device including timer, mode, brightness, frequency and breathing.

   • Settings button: Used to switch between functions such as timer, mode, brightness, frequency and breathing.

   • "+" and "-" buttons: Used to adjust the selected device settings. When "Time" is selected, they adjust the session time in 1-30 minute intervals. When the mode function is selected, they switch between red and near-infrared light. When the brightness function is selected, they adjust the brightness from 0-100%. When the frequency function is selected, they adjust the frequency from 0-1000Hz. When the breathing function is selected, it toggles between on and off.

   • Power button: Toggles between on and off.

Intensity options

Five different intensity settings allow you to choose the right setting for your specific needs. Each of the five settings offers a different power (in watts) to help reduce inflammation, increase blood circulation, relieve pain and promote fat burning.

• Intensity levels:

  • 20%: 4.9W

  • 40%: 9.6W

  • 60%: 14.5W

  • 80%: 19.4W

  • 100%: 24.5W

Recommended method of use

Use consistency is key. We recommend using the device once a day or every other day, 2-7 times per week. Note: Listen to your body as everyone is different. We like to think of it as exercise. If your body feels tired, take a rest day between sessions.

Important safety information

• Never use the product under a blanket or pillow. Excessive heat can potentially cause fire, electric shock or damage to persons or property.

• Keep the product, remote control and power cables away from heat sources and fire.

• The device is not waterproof. Keep it away from liquids. Do not immerse it in water.

• Never use the device or connect/disconnect the power cables with wet hands.

• Always switch off the device after each use.

Customer service

We are committed to providing the best customer service. If you have any doubts when using the red light therapy shade hat and the user manual does not cover it, please do not hesitate to contact us by email.

Frequently asked questions

1. Why does it look like half of the lights don't work?

   • The human eye can only see light wavelengths up to 760 nm on average. We use a wavelength of 850 nm for near-infrared LEDs, which makes them invisible to the naked eye.

2. What is the difference between red and near-infrared wavelengths?

   • Both red light at 660 nm and near-infrared light at 850 nm have been shown to improve cell function. The main difference is that red light is easily absorbed by skin tissue, leading to improved skin health and collagen production. Near-infrared light at 850 nm is invisible to the human eye and penetrates deeper into tissue, leading to benefits such as increased muscle recovery and reduced joint pain.

3. Is this product safe?

   • Red light therapy is safe and has been clinically proven to treat a variety of skin and pain relief problems and benefit hair growth.

4. How soon can I expect results?

   • The cellular benefits provided by the wavelengths in our products have been proven in many studies. Red and near-infrared light is energy for your cells. Exposing your body to this light enhances your cells to function at a higher level. The human body is complex, but amazing! It is difficult to predict how your body will respond to photobiomodulation and how quickly you will see results. Your cells will decide which healing needs to happen first.